|
|
Features real-time operating system for LabVIEW
Válek, Petr ; Beneš, Petr (referee) ; Čejka, Miloslav (advisor)
This thesis deals with certain properties of real time operating systems (RTOS) Ardence PharLap ETS, WindRiver VxWorks and LabVIEW RT module. Three methodologies of RTOS quality comparison are proposed, two of which are practically tested with described experiments on CompactRIO hardware from NI. Furthermore, there is explained need for RTOS usage and experimental comparison of jitter error influence on total harmonic distortion THD defined by two definitions.
|
|
|
Detecting RTOS Runtime Anomalies
Arm, Jakub ; Jalovecký, Rudolf (referee) ; Blecha, Petr (referee) ; Bradáč, Zdeněk (advisor)
Due to higher requirements of computational power and safety, or functional safety ofequipments intended for the use in the industrial domain, embedded systems containing areal-time operating system are still the active area of research. This thesis addresses thehardware-assisted control module that is based on the runtime model-based verificationof a target application. This subsystem is intended to increase the diagnostic coverage,particularly, the detection of the execution errors. After the specification of the architecture,the formal model is defined and implemented into hardware using FPGA technology.This thesis also discuss some other aspects and embodies new approaches in the area ofembedded flow control, e.g. the integration of the design patterns. Using the simulation,the created module was tested using the created scenarios, which follow the real programexecution record. The results suggest that the error detection time is lower than usingstandard techniques, such a watchdog.
|
|
|
Remote device control over TCP/IP
Skalník, Marek ; Frýza, Tomáš (referee) ; Fedra, Zbyněk (advisor)
This work describes an application of the ATMEL micro-controller AT91SAM7X512, with ARM architecture, for use with ethernet interface. A part of the work gives attention to the development environment Eclipse used for design and compilation of applications and also to the SAM-BA software by ATMEL utilized for upload of the particular application into the micro-controller memory. Next part describes possible usage of the Real-time operation system (RTOS) in embedded systems and shows a demo application of a webserver with an option to set IP addresses.
|
|
| |
|
|
Self-service station for charging of electric automobiles
Kubizňák, Jan ; Fojtík, Pavel (referee) ; Kučera, Pavel (advisor)
The subject of this diploma thesis is a creation of SW for the self-service charging station of ELNICO Ltd. company. The work consists of two main parts. The first part contains an overview of general charging stations for electro cars at current market. After this the prototype of the ELNICO system is described. It's main components and the control system realized by the development kit DK-LM3S9B96 are characterized here. The real-time operating system FreeRTOS, that is used by the kit, is also specified. The second part of the document deals with the SW design and realization. The thesis describes the structure and the main modules of the program. The functionality is then demonstrated by photos of running application.
|
|
|
Real Time operating system in LabVIEW - LabWINDOWS/CVI
Povolný, Petr ; Beneš, Petr (referee) ; Čejka, Miloslav (advisor)
The aim of this theses is to make user acquinted with programming of real time applications in LabVIEW and LabWINDOWS/CVI environment. The introduction outlines basic properties and parametres of operating systems. Key requirements of real time operating systems are discussed here. Their basic concept is described, focusing on VxWorks operating system and comparison with deterministic properties of common MS Windows operating system. In the second part, there is a brief specification of LabVIEW and LabWINDOWS/CVI environment and a description of real time applications built up in these environments. The final part of this theses proposes a system for analog data acquisition for checking on deterministic properties of real time application and applications built up on MS Windows.
|
|
|
Real-Time Operating System with Fixed Task Priority for Raspberry Pi
Kolář, Josef ; Peringer, Petr (referee) ; Janoušek, Vladimír (advisor)
The main goal of this work is to create a support for an open-source real-time operating system on the computer Raspberry Pi 3B+. The project FreeRTOS is selected as a great candidate for further work. The runtime environment and support for user-space applications are presented. Two demonstration applications serve as proofs of support, the first one uses two periodic tasks and reports their state to the serial interface. The second demonstration application runds the same periodic tasks, but reporting the state is done using the CAN bus, for which is the driver realised. The result of this thesis is a working system FreeRTOS for Raspberry Pi 3B+ computer with support for time-critical usages.
|
|
| |
|
|
Mechanical manipulator controlled from the cRIO platform
Karásek, David ; Šedivá, Soňa (referee) ; Havránek, Zdeněk (advisor)
This bachelor thesis is about designing and creating control software for 2 D mechanical manipulator. This device consists two translational actuators and one rotational actuator. At theoretical part author discuss possible hardware solutions and talks about basic terms used in practical part. Practical part is about designing main control application. Final program is fully functional, at the end of this thesis the author suggests some improvements which could be done to the program.
|
|
|
Real Time operating system in LabVIEW - LabWINDOWS/CVI
Povolný, Petr ; Bejček, Ludvík (referee) ; Čejka, Miloslav (advisor)
The aim of this theses is to make user acquinted with programming of real time applications in LabVIEW and LabWINDOWS/CVI environment. The introduction outlines basic properties and parametres of operating systems. Key requirements of real time operating systems are discussed here. Their basic concept is described, focusing on VxWorks operating system and comparison with deterministic properties of common MS Windows operating system. In the second part, there is a brief specification of LabVIEW and LabWINDOWS/CVI environment and a description of real time applications built up in these environments. The final part of this theses proposes a system for analog data acquisition for checking on deterministic properties of real time application and applications built up on MS Windows.
|
guest ::
